Dice Tower

thingiverse

Hello, I've designed a Dice Tower for concealing a Lamax Musician1 Bluetooth speaker on our tabletop gaming table. Any speaker can be accommodated inside, with maximum dimensions of 75mm in diameter and 204mm in height. The print of the dice tower is unsupported. However, I recommend using supports due to potential issues on other/bottom sides of steps (dependent on how well-calibrated your printer is, with a slope of 45 degrees). I've utilized some dice bowl and surface models from Thingiverse which I combined (Dice_tray.stl). This part is optional but recommended if you don't like having dice scattered all over the table. It's also unsupported. Here are both links; I didn't create these models, so I take no credit for them: https://www.thingiverse.com/thing:1789000 https://www.thingiverse.com/thing:3035873 The "Attach_bottom_dice_tower.stl" part is optional as well. It can be used as an anchor for the Dice Tower when glued to a dice bowl (or any other pad). In my case, I've attached this part to the middle of the dice bowl and secured the Dice Tower on it for improved stability and preventing movement. I discovered that the dice tend to jump over the wall of the dice bowl if too much force is applied (or if the dice is too light). Therefore, I created a fence which can be attached to the wall of the dice bowl (fence.stl). This part is optional as well and unsupported. Lastly, I utilized the cannon from an existing Thingiverse model and added a platform underneath it so it can be accommodated on top of the tower. This part needs to be printed with supports. Again, no credit is due; I didn't create the cannon, here's the link: https://www.thingiverse.com/thing:2496707