Diatone #37 250mm mods

thingiverse

Here are my mods to improve the quality of the frame Diatone #37. In this mode, you'll find: -ARM SPACER: there are two different arm spacers available. With this spacer, you can put the ESC between the two plates and choose from 7mm or 5mm options, depending on different ESC heights. Before starting to print arm spacers, please measure the height of your ESC. To print a correct design, you'll need a different screw with a 20mm leg for use with the 7mm spacer. -XT60 holder: this feature improves the cleanliness of the plate. -LEGS: I prefer my quads to be close to the ground (11mm from the floor) and when they fly, their small legs make an aggressive profile. :D There is also a plate that made drawing me crazy because of its wrong holes. Removed. -CENTER PLATE: there are two versions available. One is a replacement only, designed with added thickness (2.25mm), while the other includes the CC3D ESC's pins, featuring integrated spacers so you can flip the CC3D without obstruction. There's enough space to place the ESC connector for a clean design, but I wouldn't recommend this configuration due to concerns about the FPV camera protection. :P Stay tuned for the next design. Sorry for my bad English.