Diamond Pattern 91mm Swiss Army Knife Replacement Scales
prusaprinters
<p>These are replacement scales for 91mm Victorinox Swiss Army Knives. The models are designed to let you use three different filament colors to create the pattern. </p><p>The holes are designed to be interference fit with the knife's rivets, so they will likely not sit flush with the side on the knife if you only press them on by hand. I recommend using a clamp or a vise to lightly force the scales over the rivets.</p><p>The .STEP files for the blank scale templates and the other custom scale designs I have created are all located together in this collection: <a href="https://www.prusaprinters.org/social/118090-3dprintedman/collections/64324">https://www.prusaprinters.org/social/118090-3dprintedman/collections/64324</a> </p><h3> </h3><h3><strong>Print instructions</strong></h3><p>Print with the holes face down. There are no critical slicer settings for these parts, just make sure they do not warp. The key points to switch filament colors are at 0.3 and 0.6mm from the top of the models. I would recommend a 0.15mm or smaller layer height for best results.</p><p> </p><p>You can find additional info about how to install these replacement scales on my website at 3dprintedman.com! </p>
With this file you will be able to print Diamond Pattern 91mm Swiss Army Knife Replacement Scales with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Diamond Pattern 91mm Swiss Army Knife Replacement Scales.