Dextro Energy EDC case with less tight lid

prusaprinters

<p>Great design but after fitting the lid on the box I was unable to take the lid off again! It was just too tight (lid &amp; box have the same length sides, meaning no margins) and I believe mine was also so tight it created a small vacuum, making it even harder to remove.</p><p>So I've added a 0.1mm margin on the lid as well as a small “DEX” text on the lid to get around it creating a vacuum (while also looking nice). I used a different text for mine though, as can be seen in the screenshot.</p><p>While I was at it I also changed the fillet to a chamfer since fillets don't print nicely when curved up from the build plate.</p><p>Printed in PLA with same settings as original version:</p><p><strong>Perimeters</strong>: 2 is enough with a 0.4 mm nozzle. Just make sure the perimeters covers the complete wall thickness.</p><p><strong>Infill:</strong> Doesn't matter, or 100% if printing in other than 0.2 mm layers.</p><p><strong>Layers:</strong> 6 bottom, 4 top (standard setting).</p>