Detachable 5 slots game cards stand

thingiverse

Stand for game cards with 5 slots. ### **Purpose** The main purpose of this stand is to save table play space in boardGames, but keeping visible the top of the cards (usualy there is the title of the card). I made this stand for cards (with sleeves) of the boardgame Food Chain Magnate. But could be used for normal poker cards should be ### **Features** I made this stand with various things in mind: * **Save space on the table** compared to the space we would use if we left them directly on the table . * **Be stable enough** (obviously). * **Keep visible** almost 22mm of the top part of cards placed in the behind slots. * **Have 5 Slots**. * **Place for multiple cards in each Slot**. Each slot base is 67mm X 10mm. The number of cards they can hold will depend on the thickness of the cards and sleeves. * **Be detachable** to reduce it's volume for when it's not being used. * **Be stackable** between stands to reduce the total volume when storaged. ### **Measurement** The stand is 67mm width (max. card width), 148mm tall and 100mm deep. You can see near to 22mm of the top of the first card in the behind slots when there is a card in the slot just ahead. ### **Print info** You need to print only 1 of each piece, except for the Secure_stick, which you need to print 3. For a good print and a good pieces resistence **You must orient** the pieces so that the longest flat face is touching the bed of the printer. **You must enable to create supports** (tree support recomended). But the design requires very little support material. ### Mountage Maybe you need to sand a bit the Secure_stick pieces . **You must glue** the Half_5_cards_slots_1 and 2 to make the "Half_5_cards_slots" piece. Apart from that **it's not necesary to glue the rest of pieces together**. The center vertex of the L-shaped pieces should be on the inside side of the stand. Follow the design pictures to see the details.