Desktop Arcade (for Retropie)

cults3d

UPDATE: Final Edit. I have now included a second control box for player 2 (player2controlbox.stl) as well as the bottom cover panel (player2bottom.stl). I designed this Arcade Cabinet because I was looking for a simple to print option that fit with my gaming needs and one that has the fewest printed pieces as possible also one with no specialty screws required. Its built with a Raspberry Pi 3 or 4 in mind with the RetroPie OS. It was intended only for personal use but I am pleased with the result and happy to share. Overall the print took me a week to build from concept, to design, to print to assembly. I continue to tweak the design and I welcome any remixes. The largest part of the build is the body. It WILL fit an Ender 3 if you stand it upright, adjust your printer profile to the full bed size of 235 x 235 mm x 250 mm instead of the default 220x220x250 and print without adhesion. There are plenty of Retropie videos online so I will not discuss the installation or operation of that OS. Here is your shopping list, (feel free to substitute, these are just the items that I used) Raspberry Pi 3: https://www.amazon.com/dp/B08G8LHZLX?ref=ppx_pop_mob_ap_share Raspberry Pi 3 Power supply: https://www.amazon.com/dp/B00MARDJZ4/ref=cm_sw_em_r_mt_dp_4HNHBQZAWQ458SMX01GB Audio Amplifier Board: https://www.amazon.com/dp/B077MKQJW2?ref=ppx_pop_mob_ap_share 7 inch 1024 x 600 HDMI Screen: https://www.amazon.com/dp/B01L6YXZLY?ref=ppx_pop_mob_ap_share Speakers: https://www.amazon.com/dp/B0738NLFTG/ref=cm_sw_r_em_api_glt_fabc_H8S1M89958NCE43MNV5Y Arcade Controls: https://www.amazon.com/dp/B01M2X88QP/ref=cm_sw_r_cp_api_glt_fabc_P1SWHC4SX5EBM59G2W3W Optional External USB port: https://www.amazon.com/dp/B078LRSZDB/ref=cm_sw_r_oth_api_glt_fabc_SNZ1A08XQWRW02CHTSSC?_encoding=UTF8&psc=1 Micro SD card: Recommend at least 32GB minimum. More memory equals more games. Misc. Items - 3.5 mm double male cable - HDMI Cable (the shorter the better) - Two size 6 x 1” screws (to hold removable rear panel in place) - CA Glue or Epoxy (to adhere the Control box to the Main body) - LED/USB light strip. (Cut to only about 6-7inches) - Four port USB hub (optional) to connect 5V power for Volume control, LED, and LCD - External USB port (link provided above) Very convenient for adding additional USB controllers for multiplayer games or a USB keyboard Retropie/Raspi setup. Optional -Plexiglass sheet 1/8" (3.175mm). Custom cut to fit over control box. Adds a more professional appearance. -For Custom Arcade Cab Graphics: http://reproarcade.co.uk Part 1: https://youtu.be/5cQ-GQAfilg Part 2: https://youtu.be/XEaNmUz7zEw Part 3: https://youtu.be/2zTiIbcsdDs