Desk-mounted Headphone Hanger

prusaprinters

<p>A desk mounted headphone hanger, which can be parametrically customized via Fusion 360 to suit your needs.</p> <h3>Print instructions</h3><p>A headphone hanger which can be attached to a desk via screw mount; it's intended to be printed on its end (see the attached <code>.3mf</code> for an example). This allows it to have some nicely rounded edges without printing strangely in materials that don't bridge perfectly, such as PETG.</p> <p>This is a redesign of <a href="https://www.thingiverse.com/thing:2076034">this hanger</a>—which it is very obviously inspired by—but with a better method for hanging the headphone cord, and better orientation for printing.</p> <p>After printing, it's best to attach something with some grip to the surfaces that contact the desk; I used <a href="https://smile.amazon.com/gp/product/B018H9CCPG/">neoprene sheets</a> (Amazon link, non-affiliate) attached with double-sided carpet tape, cut to size. This ensures that the hanger stays well attached to the desk and doesn't slide around.</p> <p>You can customize the parameters via the <a href="https://a360.co/2Yw2v2a">Fusion 360</a> link; all parameters are commented, and should be reasonably tolerant to most tweaks. The only thing that isn't parametric is the screw threads, because Fusion doesn't allow for that. It's a bummer, but just adjust them as needed. There are tolerances applied to the threads so they print better, just an offset to the thread surfaces.</p>