Designer drinks coaster

pinshape

A coaster to protect your table from moisture. Instructions: Strips: The most challenging part of building and assembling this project is working with the strips used for weaving. You will need to print 14 strips in total, with 7 strips in each color if you want a checkered effect. To ensure flexibility, I recommend printing the strips with a single perimeter and close to the bed for better bonding. When printed, make sure the plugs at the ends of the strip are free from excess plastic, which can accumulate during printing. Fitting the strips onto the base requires some finesse. To assemble them correctly, guide the inner side of the plug into the hole first, then roll it back onto the other side to secure it in place. See the accompanying photo for a visual reference. If one or two plugs do not lock into place, don't worry - they will be held down securely once you attach the frame. Frame: When removing the frame from the print bed, handle it with care to avoid bending it. I recommend lifting it up vertically by one corner quickly, which should help it snap off cleanly without any damage. Base: When inserting the fully assembled base into the frame, you may need to bend it slightly for the final two corners. This is not a problem as long as you don't loosen the strips. Good luck with your project, and I hope you enjoy making this coaster.