Dental Drill and Tool

prusaprinters

<p>I Printed a Greg Zumwalt complaint button II for my dentist that has a good sense of humor. Did some customization with dental tools. Maybe someone will have some use of them in some project.</p><p>I had very limited space for the tools. I rendered the dental pick too small and printing it at 2x in the slicer fixed that. I only printed the drill once. I printed it standing up with no supports. If I was to do it again at this scale I would likely make the main handle thinner. The bit I printed laying down at .10 layer height... it took twice to get a usable one. The pick printed with supports at the ends.</p><p>I printed this tooth at 2% of its size<br/><a href="https://www.thingiverse.com/thing:1485531">https://www.thingiverse.com/thing:1485531</a></p><p>The project is here:<br/><a href="https://www.instructables.com/Complaint-Button-II-Hammer-Time/">https://www.instructables.com/Complaint-Button-II-Hammer-Time/</a></p><p>I generated the text for the sides of the project with this routine <a href="https://www.prusaprinters.org/prints/71776-3d-text-on-a-breakaway-bar">https://www.prusaprinters.org/prints/71776-3d-text-on-a-breakaway-bar</a> </p><h3>Print Settings</h3><p><strong>Printer Brand:</strong></p><p>Prusa</p><p> </p><p><strong>Printer: </strong></p><p>I3 MK3S</p><p><strong>Rafts:</strong></p><p> </p><p>No</p><p> </p><p><strong>Supports: </strong></p><p>Yes</p><p><strong>Resolution:</strong></p><p> </p><p>.2 layer height with a .4 mm nozzle</p><p> </p><p><strong>Infill: </strong></p><p>20</p><p><br/><strong>Filament:</strong><br/><br/>Geeetech PLA Silk Silver PLA <br/> </p><p><strong>Notes: </strong></p><p>SILK Silver may not be the best for detail but it does have some shine.</p><p>No support upright on the drill<br/>support from plate for the pick at the ends only<br/>support from plate for the dental drill printed laying down.</p><p> </p><p> </p><p> </p><p> </p><p>Category: Sculptures</p>