Delta Tricopter

thingiverse

A custom delta style tricopter project involves assembling several printed parts with various components. To start printing the model, follow these step-by-step instructions: 2x motor bases should have motors attached. 1 tail base connects to the 1x tail motor holder. Upper deck holds everything together. Control deck is also required. Below are all the parts needed for this build: printed components: vibration dampeners (6 pieces) plastic standoffs (4 pieces) motors specifically designed for 250 size racing quads (3 pieces) (like DYS BE1806 2300KV) 15A ESCs (3 pieces) (similar to AfroSlim) a single 9g servo motor a control board six-inch props measuring 6030 an R/C transmitter and receiver combo M3 screws along with their lock nuts and a battery with a capacity of at least 1800mAh, such as Zippy Compact, provided it can fit within the main deck Here is how you put everything together: 1. Join all bases together in a delta shape using M3 screws. 2. Mount the servo ensuring that it remains centered 3. Connect the tail motor component to the part attached to the tail using a small axis with dimensions 10-15mm length, keeping its center aligned Afterward Attach a servo arm on both sides to control flap action 4.Use plastic standoffs to secure main deck with control panel ensuring enough space for the battery. 5.Attach double sided tape securely or drill some holes for screws, connect it to main body using these attachments, attach board onto control body 6.Install the dampers while fixing motor holder into position. Secure ESCs by mounting them under the bases and stick the radio receiver Lastly, Make connections between everything else in the build