Delta / Kossel Effector with 3 Cooling fan & auto leveling
pinshape
Summary: The print requires a triple-fan setup, with each fan measuring 30mm in size and having a cooling capacity of 30mm. The system includes one hot end heat sink fan, two additional fans for printing, and an auto-leveling feature that uses three-point support. Important settings include: delta_effector_offset = 23mm Required parts are listed below: - M3 screws: 8mm in length, with six pieces (6x) required. - M3 screws: 60mm in length, with three pieces (3x) needed. - M3 screws: 20mm in length, with seven pieces (7x) required. - M2.5 screws: 10mm in length, with two pieces (2x) necessary. - Pen spring: Three pieces (3x) are required. Additional parts can be found at the following URLs: http://www.thingiverse.com/thing:1402339 http://www.thingiverse.com/thing:1387039 Print settings include: Printer: MostFun SailRafts Supports: Yes Resolution: 0.2 Infill: 50%-75% Notes: Print with PETG
With this file you will be able to print Delta / Kossel Effector with 3 Cooling fan & auto leveling with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Delta / Kossel Effector with 3 Cooling fan & auto leveling.