Dell HBA355e blower fan bracket
prusaprinters
Adapts a Delta BFB0512HA-CX3D fan to the heatsink on a Dell HBA355e SAS card. Will work with other BFB0512 variants, but the BFB0512HA-CX3D is the one you want if you care about PWM control.Requires two M3x10 hex socket flat head screws to mount the fan. The bracket presses onto the heatsink and should just hold itself in place with friction. Print in PLA is fine, no supports required.The fan can be purchased from Digi-Key in the US: https://www.digikey.com/en/products/detail/delta-electronics/bfb0512ha-cx3d/7491488Note that you will need to terminate the wire leads of the fan yourself.
With this file you will be able to print Dell HBA355e blower fan bracket with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Dell HBA355e blower fan bracket.