Dehydrator Desiccant Tray

prusaprinters

I had been using the Filament dryer mod for food dehydrator for quite a while now, but recently started to augment my Eva-dry renewable dehumidifier with these In Spool Desiccant Containers.This introduced the need to renew the desiccant and I quickly stumbled across @miker33 Dessicant Drying Tray. I liked the use of the Slicer settings to create the "screen" effect on the bottom. Unfortunately, this was not the right dimensions for my larger dehumidifier so this remix was born.**This version supports all of the same hardware referenced in @jbanion Filament dryer mod for food dehydratorI have included the OpenSCAD file and enabled Customizer so that you can adjust to any other set of dimensions. By default the following parameters were used.ECHO: "======> Tray Diameter: 308"ECHO: "======> Tray Wall Height: 23"ECHO: "======> Hole Diameter: 68"ECHO: "======> Wall Width: 2.5"ECHO: "======> Floor Depth: 3" All of the code/files are contained within GitHub - desiccant_trayI would recommend either pulling via git:git clone https://github.com/jshessen/SpringFactory.git or downloading the repo as a zip file:https://github.com/jshessen/SpringFactory --> Code --> Download as ZipPrint instructionsCategory: 3D Printer Accessories SummaryPrint SettingsPrinter Brand: PrusaPrinter: i3 MK3 MMU 2Rafts: NoSupports: NoResolution: .2Infill: 15%, 35%Filament: Inland PETG Translucent MagentaNotes:Really should use PETG given that the desiccant tends to dry in the 149F/65C range a bit warm for PLA.PrintDryPrusa ForumsHow I Designed ThisPrusaSlicer SettingsPrusaSlicer SettingsModifier Box:Layers and Perimeters:Top=0Bottom =0Infill:Fill density=35% (this comes out to holes @ ~ 1.6mm)Fill pattern=Rectilinear