Deep Madness Investigator Card Holder

thingiverse

A Card Holder and Dashboard for Investigators and Tokens in the Deep Madness Board Game. Contains: - Space for an Investigator Card - A Spinner to Track Health - A Slot for a Drowning Dial - Slots for Sanity and Madness Tokens - Space on a Ledge for Other Tokens - Slots for Stands to Use Flat, at 30 Degrees or at 60 Degrees The Front Panel Can Be Printed in Six Colors to Match the Colored Bases Supplied with the Game. BOM (Per Stand): - 1x 8mm M3 Screw - 1x M3 Brass Knurled Nut (Available at Banggood) - 1x M3 Washer Assembly: - Glue the Front and Middle Parts Together. - Insert the Knurled Nut into a Hole Using a Soldering Iron. - Affix the Spinner Using an M3 Screw, with a Washer as a Spacer. Don't Over-Tighten, Just Enough to Give a Bit of Resistance While Spinning and to Hold in Place. A Small Amount of Glue Can Be Useful to Keep the Screw in Place. - Glue the Rear Part onto the Assembly. CHANGE-LOG: 29/11/2018 - Updated the Spinner for Better Printing with a 0.4mm Nozzle. New File Uploaded. Ensure Extrusion Width for Top Layer is 0.4mm. 18/02/2018 - Added a Mk2 Variant to the Spinner Using Dual Color, Single Nozzle Technique. This Variant Doesn't Have a Spacer, So Use a Washer or Similar as a Spacer. 17/11/2019 - Uploaded Assembly Instructions with Images in PDF Format. Uploaded Amended Front and Middle Panels for More Room for Sleeved Cards.