DECORATION FOR BATHROOM and their tealight

pinshape

I conceptualized four distinctive designs to adorn his bathroom, and they're stunningly simple yet remarkably effective! Your turn to evaluate their merits! Two photophores measure 5 cm by 5 cm in height and 5 cm wide. Printing each one takes approximately 1 hour and 30 minutes. One features the word "bath" in a circular shape, while the other boasts the word "zen" in a square design. The circular "bath" photophone measures 10 cm long by 8 mm deep and requires a printing time of 1 hour and 30 minutes. I've also shared the STL file for the larger "bath" word: it's 19 cm long, 8 cm wide, and 3.5 cm thick, with an estimated print time of 12 hours at a 50% filling rate. Check out the picture! The round tealight was printed with natural PLA, while the square one features marble slab filament. Meanwhile, the word "bath" photophone was printed with natural PLA as well. 3D Printing Parameters: * Filling Rate: 100% * Printing Speed: 80% (PLA) * Temperature: 220 °C (as seen on the picture, using PLA) * Thickness: + Layer thickness: 0.1 mm + Shell thickness: 0.8 mm * No support needed, with a printing time of approximately 1 hour and 30 minutes per photophone.