Decathlon Subea Easybreath 500 2xDAR filter adapter v 1.0

thingiverse

Twin DAR Filter Adaptor for Decathlon Subea Easybreath 500 Mask. https://www.decathlon.com/products/surface-snorkeling-mask-easybreath-500-148873 For Old Mask (Not 500) Look Here: https://www.thingiverse.com/thing:4292778 For Single DAR Filter Version Look Here: https://www.thingiverse.com/thing:4305651 The New Mask Has Different, Significantly Larger Connector. Filter Cones Are Designed According to ISO 5356-1:2015 Standard, With FDM 3D Printing Technology in Mind. This Version Needs No Support at All; The Locking Tab is Separated, So It Can Be Printed Flat. This Makes it Very Strong. Easy to Assemble - Just Click In. Once Assembled, It's Hard to Disassemble. The Initial Idea Comes From https://www.thingiverse.com/thing:4248511 --- Print Parameters: - Material - PET-G - Nozzle Max 0.4mm - Layer Max 0.2mm - Perimeters - 3 - Top/Bottom Layers - 3 - Infill Density - 40% - Infill Pattern - Concentric or Grid - Seam Position - Random - Solid Infill Threshold Area - 70mm^2 Best Results Could Be Achieved With Adaptive Printing Parameters Set. Print Parameters Adjusted for Different Adaptor Areas. For Details, Ask in Comments. For Massive Production, Print Separately Adaptors and Tabs. --- Files in Project: - Subea_EB500_2xDAR_Adapter_separate_tab_v1.0.stl - Full Set Containing All Adaptor Elements - Ready to Print - Subea_EB500_2xDAR_Adapter_separate_tab_v1.0-A.stl - Adaptor with Peel-off Integrated Support - Useful for Arranging Multiple Adaptors on Print Bed - Subea_EB500_2xDAR_Adapter_separate_tab_v1.0-A-no_int_supp.stl - Pure Adaptor - Should Be Printed with Support Generated in the Slicer. Be Careful to Place Support Only Under Exhale Plugs. - Subea_EB500_2xDAR_Adapter_separate_tab_v1.0-A-plug-hole.stl - Don't Print Unless You Exactly Know What You Are Doing. Exhale Output Are Not Closed. - Subea_EB500_2xDAR_Adapter_separate_tab_v1.0-T.stl - Separate Locking Tab - Useful for Arranging Multiple Tabs on Print Bed - Subea_EB500_2xDAR_Adapter_separate_tab_v1.0-W.stl - Separate Front Valve Washer - Useful for Arranging Multiple Washers on Print Bed. Washer Should Be Fixed with CA Glue Under Front Valve Membrane to Provide Initial Pretension of Valve. --- Project is Continuously Improved in Close Cooperation With: Warsaw University of Technology Faculty of Automotive and Construction Machinery Engineering. Print and Use at Your Own Responsibility.