Deadpool belt logo - awesomeness on your pants!

thingiverse

Deadpool logo which can be attached to your belt! How awesome!! Yay! ^_^ Made in honor of our beloved killing machine, this logo resembles the one on his movie costume, but with a difference - you can attach it to your belt through the hole at the back. The belt width should not exceed 3 cm and cannot be too thick. However, the model can be resized if needed. Print Settings Printer: Easy3DMaker Rafts: No Supports: No Resolution: 0.125mm Infill: 20% Notes: Nozzle: 0.5mm Post-Printing Separately print and assemble the parts. First, print out the three colors separately - red, black, silver (white is also acceptable). Be cautious of the large bridge in the red part; unless you have a printer with two heads and soluble support material, there will be bent strings underneath. Print this part first, test your belt, and remove excess material if necessary. The back of the logo is not visible, but the other parts will cover any mess inside. Next, print out the remaining parts and assemble them securely without glue; ideally, they should fit together with enough strength applied. If they don't stay in place easily, you may need to apply some glue or sand the edges to make them slide together smoothly. Your Deadpool logo is now ready! Alternatively, if you want to print the whole thing at once and paint it afterwards, feel free to download the "combined" version of the model. However, be warned that there will be a huge hole inside, which can act as a bridge - this may not be suitable for attaching to your belt. You might consider using this option if you: Don't plan on wearing the logo on your belt, or Have a printer with two heads and soluble support material. I designed this model using Blender, based on Deadpool's movie belt. The main difference between my design and the one in the movie is that the buckle is not attached to the sides; instead, it has a hole at the back where you can attach your belt.