Deactivator for DudisGun PCP

thingiverse

A quick de-activator for DudicGun airgun _(rus. антибздун для Пистолеттобулочки)_ There are two options to use it: 1. Use the original bolt (screwed spring adjuster) with "10mm" parts - You'll have to enlarge the hole in the buttstock up to about ⌀10.5mm so that the bolt and the original spring go loosely through it (the spring's outer diameter is ⌀10.2mm) - You'll also have to shorten the original M4 bolt a bit: now it only holds the П-shaped shroud so it should not interfere with the spring and removable parts - The ⌀10.2mm nut is designed in a way that the spring-adjustment bolt cuts the thread in it itself. You can use an M4 tap of course but it's really not necessary - The shortened M4 bolt also cuts the thread in the plate sleeve itself 2. Use the original ⌀15mm nut and the original spring-adjustment bolt with a "15mm" part - You'll have to enlarge the buttstock hole up to about ⌀15.2mm which is quite time consuming as it's made of steel. Didn't check this option personally but it should work, too I used a ⌀0.9mm paper clip to make the safety pin. Printed in PLA through a ⌀0.4mm nozzle with 0.5mm line width and 0.2mm layer height