DCD Airsoft - M4 Drop Stock Adapter (Fits ARP9)

cults3d

This is a 3D printed drop stock adapter for Airsoft M4. It will provide a lower cheek position when shouldering the rifle to allow the player to aim while using paintball masks or other higher profile face protection. Depending on the length of your receiver stem, you may need to print any of the 10mm up to 25mm versions of this file. See photo on how to measure receiver stem length, and select the next size up to fit your receiver. It is also possible to cut down the length of your receiver stem to properly mate with either of these versions. Prints with supports. After printing, you need to drill through the 2 screw holes and I recommend doing this BEFORE taking off the supports for a cleaner edge. Use the drill template to ensure the top screw hole is drilled straight. Made for 13/64" drill bits but 5mm should work as well. Required Hardware: M5 nut (V1.5 uses square nut, V1.4 uses hex nut) M5 x 55mm screw (length will be dependent on your buffer tube and receiver type)