Dayton Audio TT25 mount for BJ Sim Racing pedals

thingiverse

Basic mount to add Dayton Audio TT25 transducer/mini bass shaker to the BJ Sim Racing GT pedals (should work for both throttle, brake, and clutch)Need longer M6 bolts to attach mount to pedals as the existing bolts don't have enough thread. To attach TT25 to mount, use the included self-tapping screws.UPDATE 02/07/24: Redesigned the mount point to back of pedal as the attachment point for the throttle is narrower. This also added more overall strength to the mount.UPDATE 29/02/24: Strengthened mount + added gussets as V2 version ended up breaking.Nozzle: 0.6mm (~2.5hr print on Bambu A1), 0.4mm should be fine too.Infill: 50%, less will work too.Layer Height: 0.3mm, should be ok with 0.2mm layer with 0.4mm nozzle too.Material: PLASupports: Yes Print with supports.Attach mount to pedals first, you will need 2x M6 countersunk head bolts/screws, at least 15mm length (ones that come with pedals are too short) and the torque/lock nuts that are currently attached to the bolts on the pedal face. Place the nuts into the hex holes in the mount. While pushing the nuts in with an allen key/screwdriver screw the bolts tight.Use the screws that come with TT25 to secure it to the mount.Please comment for suggestions on improvements.