DaVinci 1.0 Pro AiO - PLA Fanduct
thingiverse
DaVinci 1.0 Pro AiO - PLA Fanduct, a design inspired by ChatToBrian's Exhaust Fan Duct. I wanted to create my own version. ;) 2x Fans 5015 50x50x15mm 12V are used for cooling. 1x Switch KCD1-101 2Pin controls the fans. 1x LED 5mm provides lighting. 1x LED Holder Clip 5mm secures the LED. 1x Resistor 470 Ohm (12V/ green LED) regulates the LED's power. // A second resistor, 560 Ohm (12V/ red LED), is not used. 2x Screws M3 / 50mm hold the fanduct in place. 2x Nuts M3 secure the screws. 2x Zipties manage cables. The Cooling AddOn for this fanduct can be found on Thingiverse, when using an E3D v6 hotend: https://www.thingiverse.com/thing:2549178 Testing is complete. The file has been updated! Loading and unloading filament is tested - OK. Printing is tested - OK. Calibrating the z-axis is tested - OK. Switching to engraving mode is tested - OK. Print Settings: Printer: XYZ DaVinci 1.0 Pro AiO Rafts: No rafts are used. Supports: Yes, supports are enabled. Resolution: The resolution is set at 0.20 mm. Infill: 25% infill density is used.
With this file you will be able to print DaVinci 1.0 Pro AiO - PLA Fanduct with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on DaVinci 1.0 Pro AiO - PLA Fanduct.