Data Terminal Housing for Lamber Kolibri Turbines

youmagine

This housing serves as a home for the data terminal electronics board of the Lamber Kolibri Turbines. Typically, these turbines are shipped with the bare data terminal board alone, sans any protective casing. The electronics board is secured in place by the upper and lower segments of the housing, eliminating the need for adhesives or fasteners. A transparent plastic sheet must be cut to fit into the window opening in the top segment of the housing, which requires a precise cutting template available as a printable file (Kolibri Fenster). The press button must be printed four times. Please note that I have two Kolibri Data Terminals at my disposal. One came with the cable attached to the upper side of the electronics board, while the other had it attached to the lower side. The cable opening in the housing is designed for a cable connected to the top side of the electronics board. If your board has the cable attached to the lower side, you will need to either enlarge the hole for the cable in the lower segment of the housing or re-solder the cable to the upper-side of the board.