Darth Maul Lightsaber - Customizable

thingiverse

I create other lightsaber designs that are compatible with this lightsaber. You can see them at http://cgtrader.com/dagobahben This is my take on the Darth Maul hilt design, made printable and customizable with my Lightsaber Assembly kit. When assembled in the standard dual bladed configuration, it is 492 mm (19.3 in) long. The diameter of the grip is about 1.6 in (41 mm). This kit includes the parts to make Darth Maul's saber, broken up into sections. Each section is named the same way for all my lightsaber designs. - Emitter - Switch - Sleeve - Pommel This hilt will accept a 1" diameter Blade. The interior has a diameter of 29 mm for electronics installation. ASSEMBLY: The Lightsaber Assembly kit contains models for putting your hilt together. It comes with press fit parts, as well as threaded parts for easy customization. There are two sizes of adapters - 32 mm and 24 mm. The kit also includes a press fit 32 mm to 24 mm adapter so you can mix and match parts. Different sizes are used to maximize the space inside the hilt for electronics. It is recommended you print adapters at a high infill % for strength. This model uses the following adapters for each part: - Emitter to Switch: 32 mm - Switch to Sleeve: 32 mm Print the Emitter, Switch, and Sleeve parts twice to assemble it as a dual bladed saber. Using my adapters, you can easily assemble your own custom saber. PRINTER SETTINGS: No scaling is needed; this model was made to be a life size prop. Measurements for the hilt are in the photos. For higher quality, we recommend a layer height of .1mm an any FDM printer. We recommend orienting the hilt sections vertically on your printer, and use supports where necessary. Color preview included to show potential finished product. Does not represent an actual print. I create other lightsaber designs that are compatible with this lightsaber. You can see them at http://cgtrader.com/dagobahben