Dartboard LED Ring and Camera Mount V2

prusaprinters

Wanted to make LED ring and Camera mounts for my Dartboard Setup which was easy to print. This design is adapted from this website (https://docs.autodarts.io/3d-printing/).Github for autodarts is https://github.com/autodartsDiscord server is https://discord.com/servers/autodarts-community-802528604067201055All parts except for the camera cover can be printed without any supports.I printed mine at 0.28mm layer height with a 0.4mm nozzle using PLA Plus without any issues.  LED segments were glued using 5 minute epoxy adhesive.  Hardware requires is M4x20 and M4x18 Socket Button-head screws with M4 hex nuts. The OV2710 USB Camera Module is held with M2x6 screws as is the Camera CoverAssemble the LED ring elements with the connection pegs using 5 minute epoxy.Update 3/24/2023: Added Ring Light - Connection Peg - More Clearance.stl  (Connector Peg with 0.3mm clearance for easier assembly)Update 2/21/2024: Added "Ring Light v2" Prefixed models that add provision to block light-bleed (add 1.75" Diameter filament in groove before assembling the light ring with the connection peg).  The "Ring Light v2 (40mm)" Prefix raises the LED Ring by 40mm from the previous version.Update 3/02/2024: Added relief in camera cover for modules that have straight connector.  Press down wires to route closer the connector then install the Ring Light v2 - Camera Housing Cover v2.stlHardware:Qty 6    M4x20 Buttonhead Cap ScrewQty 6    M4x18 Buttonhead Cap ScrewQty 12  M2x6 Buttonhead Cap ScrewQty 3    M2x6 Countersink Screw2 part Epoxy to assemble Led Ring Segments and Connection PegsSmall pieces of 1.75" Diameter Filament for light-bleed block (see images)