Dart Zone Nexus Pro 17/32 Brass Barrel Kit

thingiverse

Want to secure a brass barrel to your Dart Zone Nexus Pro without using nasty electrical tape? Or maybe you want to more easily disassemble/barrel swap your brassed Nexus? Now you can! **Requires: K&S 17/32 brass tubing (cut to your desired length), adhesive, your flavor of 3d printing filament** ##### 17/32 K&S brass barrel muzzle adapter: - "DZNP_BMLock.stl" - "DZNP_BMuz17_32.stl" - Tolerances are tight when locking down the barrel. You may have to work the threads in or even mildly trim/sand the inside for the perfect fit, but it is designed to be tight, as these two pieces are the primary parts holding the barrel inside the blaster. ##### 17/32 K&S brass barrel press-fit dart gate adapters: - "DZNP_Adapter17_32.stl" - "DZNP_Adapter17_32+.stl" - Either one of these files will work, but the "+" variant has a small nub on the inside of the adapter to stop your brass from sinking in too far. Press fit the skinny end of the adapter into the flared end of the stock dart gate inside the Nexus Pro and secure it with a strong adhesive - Both of these files have extremely tight tolerances, and I'd suggest trimming the inside rim with a small, sharp knife (such as an X-acto knife or similar hobby knife) in order to flare the rim and make inserting the brass tube easier. - This adapter **MUST** be secured to the dart gate via some form of adhesive. My personal recommendation is to pick up some apoxy from your local Walmart or hardware store, but it can be secured just as easily with some hot glue and/or super glue. Sink the adapter into the dart gate, then fill the extra space on the outside with an adhesive of your choice. *Credit for the BMLock and muzzle threads goes to EnderSavesTheDay* (https://www.thingiverse.com/endersavestheday)