Dark Mask - Jointed

pinshape

Create Your Own Articulated Frightening Mask You'll Need Just Two Parts and a Little Creativity. First, Print Both Pieces and Assemble Them by Aligning the Jaw Axis. Next, Add a Thin Elastic Cord to Open and Close the Jaw. For More Information, Visit This Link: http://diwo.bq.com/builds/imprime-tu-mascara-para-halloween/ The Author of This Project Can Be Found Here: http://diwo.bq.com/builds/imprime-tu-mascara-para-halloween/ Here Are the Settings Used for Printing: Resolution: Layer Height (mm): 0.2 Infill Percentage: 10% Notes: Printed with PLA at 210 Degrees Celsius You Won't Need Any Supports, but You May Want to Add a Brim or Raft to the Top of the Mask for Better Adhesion. When Assembling the Mask, Be Sure to Remove the Small Support from the Lower Piece Before Joining It to the Other Part. Post-Printing Instructions: Remove Any Excess Material Align the Jaw and Insert the Joint into the Slot Use a 3-Slot Mechanism to Secure the Jaw in Place Add a Thin Elastic Cord (1mm - 1.5mm Diameter) to Open and Close the Jaw Finally, Attach the Mask to Your Head Using the Elastic Cord Holes