Danica Danvise Fly Tying Tools

cults3d

Danica Danvise Fly Tying Vise Add Ons / Parts / Tools Herewith Three Add-Ons for the Danica Danvise Fly Tying Vise The three parts are: 1. Tool Holder STL's for two different Clip-On Holders are supplied. One is also adjusted for another Vise with a 9,5mm shaft 2. Waste Bin A STL for a Clip-On/Off Waste bin is supplied. It is easy to clip off to empty the waste bin and than to clip it back on. 3. Contrast Back Plate This backplate makes it easy to see the hook/fly when tying regardless of the background. The Back Plate consists of three parts: A. The holder This is attacht to the shaft and will hold the arm which is attached to the Backplate. The holder has a small hole in which a Insert can be melted so a bold can be used to tighten the arm. A small screw could be used as alternative. B. The Arm The Arm has a shorter and longer arm. The shorter arm is used to be inserted in to the holder bu see for your self and decides what fits your needs. The arm will be easily inserted in the holder which than can be tightened with the inser/bolt or screw. C. The Contrast Backplate This contrast backplate has three attachment points of which two are used only (suitable for left and right handed tie-ers) Be aware that the arm has to be inserted with some force but probably you need to sand the part that goes into the backplate a bot down to get it fit properly. These designs and STLs can and may be used for personal use only. These may NOT be used for commercial use. Also it is not allowed to print it for others on time/material price based. If you need alterations in STL or prints, please contact me.