DAC or Headphone Amp Stand

prusaprinters

<p>This is a printable shelf for getting your DAC, or other gear off the surface of your desk, and up a little bit so that it is easier to use controls like volume.</p> <p>I used this to elevate my DAC so I could use the knob comfortably, but I also paired it with a <a href="https://www.prusaprinters.org/prints/41886">Switch Tray</a> which routes the various cables underneath the shelf. The width of the shelf is matched for that tray.</p> <p>The width of the shelf should accommodate many DACs, headphone amps, and the like. Since printing a full 240x205mm shelf can be time consuming as a "one-size-fits-all", I've included a shorter 160mm shelf which fits equipment that isn't quite as deep.</p> <p>This will not print on smaller printers such as the Prusa Mini. The legs and shelves are sized for the 250mm build width of the Prusa MK3(S).</p> <h3>Print instructions</h3><p>To Print:</p> <ul> <li>Print a Shelf</li> <li>Print 2 Legs</li> <li>(Optional) Stick rubber feet on the bottom of the legs to avoid sliding. 3 per leg. </li> </ul> <p>Recommended Material/Settings:</p> <ul> <li>PETG</li> <li>0.2mm Layer Height</li> <li>15% Grid, 4 Perimeters</li> <li>4 Bottom, 5 Top Solid Layers</li> </ul> <p>Infill can probably go down to 5-10%, but I haven't tested it. The infill is really there to prevent sag of the surface layers, while the bracing prevents flex.</p> <p>PETG is recommended to keep warping/curling to a minimum with this model, and because some DACs can get quite warm.</p> <p>Shelf Depth Recommendations:<br/> <strong>160mm Shelf</strong>:</p> <ul> <li>SMSL SU-8, SU-9, M200</li> <li>Topping DX7 Pro, D90, D30, E30, D10(s), D50s, A50s, L30, DX3 Pro</li> </ul> <p><strong>205mm Shelf</strong>:</p> <ul> <li>Benchmark DAC3</li> <li>Matrix Audio Mini-i 3</li> <li>Mytek Brooklin DAC+<strong>†</strong>, Liberty DAC</li> <li>SMSL M400<strong>†</strong></li> <li>Topping DX7s, D70</li> </ul> <p>† - Feet may or may not be in the right place for the shelf.</p> <p><strong>Don’t Fit</strong>:</p> <ul> <li>Matrix Audio Element Series</li> <li>Mytek Manhattan DAC II</li> </ul>