Da Vinci Extruder Clip-on Calibration tool
thingiverse
Calibration tool for the Da Vinci Pro 1.0 extruder can be clicked into place. Initially, a different calibration tool was printed from Thingiverse (http://www.thingiverse.com/thing:718768) but it seemed incorrect. A new design was created that clicks onto the extruder. Once attached, a dial indicator can be inserted into the 8mm hole. The .stl file for this tool needs to be printed and support material removed. Next, drill an 8mm hole in order to fit the dial indicator. Click it firmly onto the front of the extruder. Place the indicator in position and start leveling (use jog mode on the 3D printer to move the extruder). Once finished, the tool can remain attached. Print Settings: Printer: XYZ Da Vinci 1.0 Pro Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Notes: Printed with low support
With this file you will be able to print Da Vinci Extruder Clip-on Calibration tool with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Da Vinci Extruder Clip-on Calibration tool.