Da Vinci 1.0 Pro cable chain mounts

thingiverse

I have successfully utilized the chassis mount from this remix source file, and it remains unchanged. Added a mounting plate for the head of the machine; it printed and fitted perfectly the first time. To secure the plate to the head, a small modification is required to the screw that retains the nozzle clip head. This can be achieved by gluing a 3mm nut to the screw in its original location, allowing it to be secured with a screw from the front side... or by inserting a longer 3mm screw into the original location, permitting this plate to be bolted from the front side. I am using the first method, as evident. I have left the mount plate devoid of any holes except for the one that secures the plate to the head. It is recommended to use a countersunk screw; however, I did not have any at the time, so items can be fitted where desired. Two 2mm holes were then drilled where the chain was to be mounted, and tapping screws were used to secure the cable chain to the plate. The loose end was finished with a cable clip. Overall, I am extremely pleased with how it looks and functions; I utilized a 10x10mm chain here, but the connector was tricky to fit through, requiring care to prevent damage to the harness.