D&D 9 dice box with figurine

D&D 9 dice box with figurine

thingiverse

Bottom: No support is available. Top: Print upside down with a logo on the print surface, using supports. Set "Support Top Distance" to 0.2 to get the support out of the logo. Both: Print speed is set at 40. Infill Density is 20. Layer Height is 0.15 mm. Build Plate Temperature Initial Layer is 80c. Build Plate Temperature is 70c. The build plate temperature was decreased after the first layer to reduce mushrooming. Six 3mm magnets were used (purchased on Amazon at tinyurl.com/ya24fuwu). Please post your prints. Updates: March 6th, 2019: A new print with two normal size D6 dice on both sides has been uploaded. The bottom is the same as before with numbers under the die (dicebox_figurine_bottom_two_d6.stl). Two choices for the top are available: one without the D&D logo (dicebox_figurine_top_two_d6.stl) and one with the D&D logo (dicebox_figurine_top_two_d6_dd_print.stl). January 17th, 2019: An issue was identified: the top half of the dice box was missing areas for the D6 and mini D6. The problem was resolved by re-uploading the top half of the dice box, both with logo and without logo.

Download Model from thingiverse

With this file you will be able to print D&D 9 dice box with figurine with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on D&D 9 dice box with figurine.