Cyclops extruder x-carriage

thingiverse

I designed and build my own 310x310x250mm dual extruder 3D-printer, which shows some similarities to the CR10-s and Tevo Tarantula. In the design of this printer I used the Cyclops 2-in-1-out dual extruder. This design is a full x-carriage for this Cyclops dual extruder which can be used for a 2020 v-slot aluminium extrusion, with a fan-duct for a radial extruder-fan (see links bellow). I used 5 M3 brass inserts and 5 M3x10mm screws to attach the extruder plate to the x-carriage. The V-wheels and spacers (2 normal an 2 eccentric spacers) are attached to the x-carriage by 4 M5x25mm screws. Most importantly I attached the Cyclops extruder with the use of 3 M3x18mm screws and 3 M3x8mm stand-offs. Finally I used 2 M3x25mm screws to screw the radial fan in to place. The considered Cyclops exturder: https://nl.aliexpress.com/item/32894970716.html?spm=a2g0o.productlist.0.0.2fe8680990DGCW&algo_pvid=00994bae-58c1-4a2c-8705-a458b4116c13&algo_expid=00994bae-58c1-4a2c-8705-a458b4116c13-40&btsid=0b0a119a16095010050653829ed7f5&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_ And the considered radial fan: https://nl.aliexpress.com/item/32844095917.html?spm=a2g0s.9042311.0.0.27424c4dG0xXiA Also check out my other designs and as always open to feedback and/or comments.