Cyclone PCB Factory Dual Z-axis

cults3d

Cyclone PCB Factory Dual Z-Axis The Cyclone PCB Factory Dual Z-Axis gives the Cyclone PCB Factory two attachments on the Z-Axis. This allows different accessories to be used as a pick-and-place head and solder paste dispenser. The base machine is the Cyclone PCB Factory, which is used for cutting and milling of PCBs for prototyping. The linking PCB powers and controls the Z-axis, limit switches, and accessories. It was designed to help manage cables together. This is just one part of a project that I've been working on, and I hope it can be operational soon. Parts: The Dual Z-Axis replaces the Y-axis/Z-axis on the Cyclone PCB Factory. The machine uses MGN12H Sliding Blocks and NEMA17 stepper motors to move the Z-axis. Three limit switches check limits and positioning. All screws used are M3 screws. Electronics and Controller: The controller is a CNC controller with 8 stepper motor controllers, 16 limit switch inputs, USB, and SD capabilities. The linking PCB gets power and control from/to the Dual Z-Axis. You can get it here. Underneath the Dual Z-Axis, there's a camera for downward imaging. https://tinkersprojects.com/project/cyclone-pcb-factory-dual-z-axis/ https://www.tindie.com/products/17210 Stay Up to Date: New parts will be added. Stay up to date by following: Project page -> https://tinkersprojects.com/project/cyclone-pcb-factory-dual-z-axis/ This Thing -> https://www.thingiverse.com/thing:3672766 My Profile -> https://www.thingiverse.com/haybailes/about Twitter -> https://twitter.com/TinkersProjects See Other Projects: Check out this and other projects that I've done: https://tinkersprojects.com/