CYBERTRUNK USB/PHONE STATION

thingiverse

I've seen all the cyber truck models out there, so I'm not going to bore you with another one. Instead, I'll show you a design made from USB holders and with enough trunk space for an iPhone or Samsung Note. My design is simple enough for anyone to print, no tool required - just print and snap them together. You might need some extra time to clean the holes, but it will be worth the time. Please check out the video before downloading/printing the part, so you know how they go together. If you like the design, leave a like, and if you want to support this small channel, subscribe! https://www.youtube.com/watch?v=tlOyF7c3Jwc PLA or ABS is fine. Here are the STL files you'll need: CYBERTRUCK BASE x1 CYBERTRUCK Top x1 CYBERTRUCK tailgate x1 CYBERTRUCK wheel x4 CYBERTRUCK wheel cap x4 Here are the settings I used in my printer: Printed with: Material: PLA Layer height: 0.25mm Initial Layer Height: 0.15mm Infill percentage: 100% Infill pattern: line Printing temp: 210 Build plate temp:70 Flow: 100% Retraction Distance: 3 mm Retraction Speed: 10 mm/s Print Speed: 60 mm/s Travel Speed: 150 mm/s Initial Layer print Speed: 25 Initial Layer travel Speed: 30 Z-hop when retracted: enabled Cooling fan: 100% Support pattern: zig zag Support density: 15% Filament Brand: PRILINE