CyberPunk 2077 Car

thingiverse

CyberPunk 2077 car, this custom-built vehicle requires precise assembly of many intricate parts that need to fit together seamlessly. To ensure a successful print, your printer should be equipped with a 0.4mm nozzle to avoid wasting valuable time and material. First, try printing wheel01.stl and wheel02.stl to assess their compatibility before proceeding further. These two components require some force to assemble or disassemble, indicating that they have been designed to fit together securely. Please note that this model has only been thoroughly tested on an outdated Ultimaker Original, and I strongly advise against relying solely on these results, as they may not guarantee a successful print. Good luck with your printing endeavors! Additional information: - Body02.stl and body03.stl both feature integrated printing supports that must be removed before assembly to ensure proper fitment. - Detail01c.stl and Detail01b.stl are distinct components; arrange the largest one near the top and the smallest at the bottom of the car for optimal results. To complete the CyberPunk 2077 car, follow these print instructions: - Print 48 units of wheel04.stl (you may need additional bearings if your wheels become loose). - Print 4 units of wheel03.stl. - Print 2 units each of wheel02.stl and wheel08.stl. Next, focus on printing the structural components: - Print 4 units of sp01.stl. - Print 8 units of sp02.stl. - Print 4 units of sp03.stl. - Print 6 units of sp04.stl. - Print 2 units each of sp05.stl and sp06.stl. For a comprehensive assembly guide, refer to the video tutorial available at https://www.youtube.com/watch?v=7w5hIhSNBuY. To stay updated on any model revisions or improvements, visit the following link: https://www.youtube.com/watch?v=M1g4JVXQog4. The recommended scale for this model is approximately 1/20, and its dimensions measure around 22x11x6cm.