Cute, toon style, antique car

cults3d

NOTE: COPYRIGHT PA1© - SUBSCRIBE TO MY PATREON TO GET ALL MY FILES FOR FREE, EXCLUSIVE MODELS AND A COMMERCIAL LICENSE TO SELL YOUR PRINTS: https://www.patreon.com/PA1_MAKER Just like the tractor, Kids will love this one for sure!! Note: Because of the small parts, it is not recommended for very young children. You know your kid, you know if its suitable for him or not. It is also a great desktop decoration too. -Super easy print, and it's 100% support free! -All parts are already placed in the right orientation. -Assembly is pretty straight forward but an exploded view is included. Make a dry fit check before glueing the parts together. This is the best way to understand how to glue them and where you should put your glue. TWO SIZES ARE POSSIBLE: ACTUAL SIZE: You will need (4x) M3 screws: -M3x16mm (2x) for the rear wheels -M3x12mm (2x) for the front wheels BIGGER SIZE: SCALE ALL THE PARTS at 133.34% You will need M4 screws: -M4x16mm and 20mm (2x of each) Holes are self-threading, so you can use imperial equivalent too. ALL THE OTHER PARTS ARE GLUED, except the four main wheels. The rear spare wheel is glued to the body of the car. You can scale it bigger if you want, you just need to figure out which scale is best for the screws you're gonna use, like m5, m6 etc... For the wheels: Don't tight them too much! ;) Tight until they can't turn anymore, and then unscrew a few turns to have the right play and make them spin freely. If you have any questions, you can reach me here or on my facebook page!!! Have fun!!!