Customized frams for Nintendo labo vr-kit 3D print model

cgtrader

You need Nintendo labo vr-kit for Customized frames /!\ to suit more needs later Virtual_boy-case.STL Cura Settings: - Infill : set at 10% - Layer thickness : .2 - Nozzle temperature : 203° F - Bed Temperature : 66° F Support : build on Every Place available Time for 3D print: 1h 55min using 20g filament, cost 6.71 meters long Size Measurements: - Length (X) : 181.75 mm - Width (Y) : 29.78mm - Height (Z): 30.25 mm Case_Mario.STL Cura Settings: - Infill : set at 10% - Layer thickness: .2 - Nozzle temperature: 203° F - Bed Temperature: 66 °F - Support : build on Every Place available Time for 3D print: 2h 39 min, using 30 g filament, cost 9.98 meters long Size Measurements: - Length (X) : 179 mm - Width (Y) : 79mm - Height (Z): 29mm M_logo.STL Cura Settings: - Infill : set at 10% - Layer thickness: .2 - Nozzle temperature : 203 ° F - Bed Temperature : 66°F No Support build Time to print M-logo is just 3 minutes when moving at a speed of .13m/sec Zelda_case.STL Zelda-case includes: HyruleSymbol / triforce Cura Settings: - Infill: set at 10% - Layer thickness: .1 mm - Nozzle temperature: 203°F - Bed Temperature: 66 ° F - No Support Snes_case.STL Snes-case - Cura settings - infill set to 10% - Layer height is .2mm - nozzle temp : 203 degrees Fahrenheit - Bed Temp : 66 degrees - Support available Yes