Customizable WIFI QR-Code Display

prusaprinters

Frame to display a QR code containing your (guest) wifi credentials. On the front it shows the letters "WIFI" and when you flip the panels it shows the QR code.See custom section "QR code" for instructions to customize the QR code. HintsI printed a brim for the frame and the lids to prevent warping. You don't need rafts for the other components. Support is only needed for the rack gear to support the grip - you can cut it off easily afterwards.glue the front and back panels together - important:combine front panel 1 with back panel 1, 2 with 2 and so onthis way the QR code will be shown mixed up from the back but will be displayed correctly when the panels are flippedsand the lower panel pins, so that the panels turn smoothlysand the rack gear grip to get rid of the remaining support and enable for a smooth movementthe rack gear grip is not exactly in the middle of the rack gear - if it does not fit when closing the upper lid or you're not able to turn around the panels completely - turn it aroundwhen you close the upper lid make sure thatthe rack gear is shift to the left side (from the back)the panels are completely flatthe text "WIFI" is shown on the frontyou can re-open the upper lid any time you want to re-adjust or replace partsthe lower lid covers a cavity you can fill with sand or concrete to give the frame some weightglue the lower lid to the frame to close the cavity Custom QR codeI included a template for the back panels, so that you can add your own QR code which you can generate here. To add your own QR code edit the back panel template as follows (details depend on the software you use):open the STL add QR code as SVG (be careful to choose the correct side - rounded pin corners = front) extract the QR code 0.4 mm (2 layers) cut the panel template in 7 separate panels (16.565 mm width each) save the separate panels with your QR code as STLs DonationFind my models for free on Printables. Feel free to buy me a coffee, if you like my designs. Thank you!