Customizable Spiralized OpenSCAD Maze

thingiverse

It seems ridiculously necessary to create a derivative, but making it its own thing was a required change to enable the OpenSCAD mazes to be printed with the "spiralize the outer contour" option checked under Expert Settings in Cura (or similar mode in other slicers). I added a cylinder to the object to make it solid, allowing you to print only the single outer wall. After printing the lid to the maze with the spiralize option, I decided to try this - see object http://www.thingiverse.com/thing:1988521. You might have to adjust measurements/scale slightly depending on your printer and settings. I printed the mazes and lids at 100% scale across the board as long as the lid and maze are made of the same material. If you're mixing/matching materials, then you'll have to scale up/down items slightly, up to 2%, depending on the material. The example prints photographed above have the bottom 13mm cut off in Cura's settings and 3mm "solid" bottoms - this works well with spiralized lids but doesn't give much to grip if using original lids. I modified 10 of the mazes from the customizable OpenSCAD maze, but you can paste in your own or generate a random one (see source object for link). Print Settings: Printer: Monoprice Maker Select Rafts: No Supports: No Resolution: 0.25 Infill: N/A