Customizable smart temperature tower + injector script

cults3d

This is a customizable temperature tower based on Thing:2729076. I included a Python script to easily inject the temperature steps into the .gcode file. ##Customizer Parameters start - the initial temperature end - the temperature of the last block step - the temperature step between blocks ##Steps Open 'customizable_tower.scad' in OpenSCAD and change the parameters to suitable values. (The Customizer can be opened under Window -> Customizer). Then, export an .stl file.Alternative: Use the Customizer on Thingiverse. Slice the .stl file with your preferred slicer. Run the included python script to inject the temperature steps. Usage: python temp_injector.py input_file output_file initial_temp temp_step [section_height] [base_height] Example: python temp_injector.py tower.gcode tower.injected.gcode 225 -7 Help: python temp_injector.py -h If you have problems with the injector script, please let me know in the comment section. I only tested it with a .gcode file from Cura, but it should work with other 3D-Slicers as well. The injector script is also available on Github. ##Requirements OpenSCAD Python >= 3.5 ##Appendix The script was inspired by:https://github.com/fablabnbg/tronxy-xy100/blob/master/tempinjector.py The base and the block .stl files were converted to .scad files using the Blender add-on io_mesh_openscad in order to create a single .scad file without imports. (Customizer Limitations)