Customizable Sinar Lens Board (Horseman, INKA)

thingiverse

Customizable Sinar Lens Board. ==================== ### Customizable settings: +**Board:** type of the board (filled center part, border only, or border with support); thickness of the board (will change only the center part of the border). +**Drilled hole** for your lens: choose the diameter and offset. Few examples are shown with possible settings (written in blue), to make it easier to understand, board type, and how the thickness works. Customizable Sinar/Horseman/INKA **RECESSED lens board**: https://www.thingiverse.com/thing:5388488 The dimension of the board is 140x140mm with rounded corners (r=1), which should fit Sinar, Horseman, and INKA cameras. Simply open the design in "Customizer"* to enter the required values. Or download the SCAD file (text/code) and edit it in OpenSCAD software (free, available to download from https://openscad.org). 2nd option is preferred - the STL file can be generated within a few moments. Using a web-based "Customizer" can take several hours to generate an STL file. *For some reason "Customizer" doesn't preview/generate Board types 2 and 3. This issue is on the "to-solve-list". OpenSCAD works as it should. If you are not able to use OpenSCAD or getting problems generating an STL file, write a comment below with the required settings. I will generate the STL file for you and upload it here. **Please include the following info:** **+ Hole:** **+ Hole Offset:** **+ Board Type:** **+ Thickness of the board:** [Follow me on Instagram](https://www.instagram.com/mlformat/ "Medium and Large format photography") **Exercise extreme caution when mounting your precious/expensive/rare lens on a 3d-printed lens board. Depending on many factors, such as (but not limited to): print quality, material, lens weight and etc. - the lens board might be too weak to hold your lens properly. Please test your board before using it. Do not risk your lens!**