Customizable RouterBOARD Mount

prusaprinters

<p>Customizable RouterBOARD mount!</p> <p>This is based on tedder's Mikrotik RouterBoard Wall Mount for RB260GSP, but the hole spacing on my old RB750GL is different. So, using their mount as inspiration, I whipped up my own similar mount in openscad, which I made customizable. For now, only the distance between the two mounting pins is customizable, I may add more dimensions to the customizer if requested</p> <p>I included the STL for the 750GL mount as well</p> <p>My version has slightly different dimensions for the rest than the original, it should be optimized for printing at 0.2mm layer height. I made it slightly thicker than the original, and the heads of the mounting pins are also a bit larger</p> <p>I mounted mine with 3M VHB mounting tape, there are also screw holes similar to the original's</p> <h3> Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Prusa</p> <p><p class="detail-setting printer"><strong>Printer: </strong> <div><p>Mk2.5s</p></div><strong>Rafts:</strong></p> <p>No</p> <p><p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div><strong>Resolution:</strong></p> <p>0.2</p> <p><p class="detail-setting infill"><strong>Infill: </strong> <div><p>10%</p></div><br/> <strong>Filament:</strong><br/> AIO Robotics PLA Red <br/> <p class="detail-setting notes"><strong>Notes: </strong> </p><div><p>I recommend 3 perimeters so the pins are nice and strong, this should give plenty of surface area for inter-layer bonding so it should work fine with PLA or PETG. </p> with 3 perimeters, infill settings won't really matter</div></p> </p></p></p> Category: Organization