Customizable Lithophane lamp

prusaprinters

<p>Litho lamp customizable<br/> You can set custom size each side also can set many more options<br/> you can find allso here <a href="https://www.thingiverse.com/thing:2771687">https://www.thingiverse.com/thing:2771687</a><br/> what you need<br/> generate lithophane picture on site <a href="http://3dp.rocks/lithophane/">http://3dp.rocks/lithophane/</a><br/> you need openscad have install on your pc<br/> set parameters generate each parts one by one and can print it<br/> STL file here is only for visualisation do not print it</p> <p>You need 8 M3x20 screw<br/> 4 x M8x10 for cable holder<br/> Some tips</p> <p>Only you need to care the main Height must be higher min 5 mm from the picture and<br/> weight must be 25 mm bigger.<br/> You can have set all 4 picture different but the lamp size need to set for the biggest picture. and the lamp holder size.<br/> Roof and Leg will be over the main height.<br/> If will use main voltage (220V) and you has no experiences please please dont do this!!!</p> <p>The holes I designed little bit smaller you need drill it with 3.3 -3.5mm<br/> by pillars and bottom or top where comming the lamp holder 2.5mm and cut threat M3</p> <p>Note: don´t export like all part this is only for check setting export all part separatly ( if all pictures hase same size you need export Pillars only ones and print 4 times)</p> <h3>Print instructions</h3><p>Print PETG</p>