Customizable knob for pot lid and drawers

prusaprinters

Designed this as knob for a pot lid, but I'm sure you can use it for a drawer and a few other things too.Remember to block support at the top of the bolt, because we don't need support there.You should print this in ABS or PETG, PLA won't work.All properties of this knob is customizable.Feature:Customizable bolt size.Create cavity to insert metal hex nut, or without if you want to thread the knob yourself.Create whole knob or half a knob for printing without support.Customizable knob styles: inward, outward or straight.Customizable base size and top round knob size.The easiest version to print among my stl files is the outward_v2.stlBTW, If you're using octoprint, add the script below to your octoprint GCODE setting and you can do advance pause similar to the functionality on Prusa firmware. You can then pause mid-print to insert the hex nut.After print job is paused; relative XYZEG91M83; retract filament, move Z slightly upwardsG1 Z+5 E-5 F4500; absolute XYZEM82G90; move to a safe rest position, adjust as necessaryG1 X0 Y180Before print job is resumed; relative extruderM83; prime nozzleG1 E-2 F4500G1 E2 F4500; absolute EM82; absolute XYZG90; move back to pause position XYZG1 X{{ pause_position.x }} Y{{ pause_position.y }} Z{{ pause_position.z }} F4500; reset to feed rate before pauseG1 {{ pause_position.f }}Print SettingsRafts:YesSupports: YesResolution:0.2Infill: 20%