Customised 3D printed magnet with logo and / or QR code

thingiverse

This version here is a print with some breaks. You have to set a break in the slicer at a certain height. When the break has started, you can put in previously printed plates or the magnet (diameter 10 mm, height 2 mm). Then you can continue printing until the next break. I printed both plates (QR and the logo) only with a single extruder. For this I changed the filament at a height of 1 mm. For the model QR code and logo plate you can set a break at 2.8 mm and 7.05 mm, but depands on your printing settings. I used for the first layer 0.300 mm and then I printed with a layer thickness of 0.250 mm. Making of video: https://www.instagram.com/reel/CnUYfG_jQZ1/?igshid=YmMyMTA2M2Y= I used this QR code ->.stl generater (settings see picture): https://printer.tools/ For the Box-logo plate I used this litophane generater (setting see pictures): https://3dp.rocks/lithophane/