Customisable Rear Lens Cap - Mamiya

thingiverse

This is a customisable rear lens cap. It was designed for a Mamiya RB67 lens cap but it also fits RZ67. All the relevant dimensions and texts can be changed in the attached .f3d file. If you don't have fusion360 and need other dimensions you can contact me to change them. I would be very thankful for any donations under paypal.me/uwe765. Following files have been uploaded: -Mamiya_CostumisableRearLensCap.f3d the fusion360 file with parameters -Mamiya_LensCapRear_Docum.pdf documentation with parameters description -Mamiya_LensCapRear_NoAsthetics.stl lens cap for an 88mm diameter lens -Mamiya_LensCapRear_f37mmFishEye.stl lens cap for an 88mm diameter lens, with inscription -Mamiya_LensCapRear_65mm_f4_5.stl lens cap for an 88mm diameter lens, with inscription -Mamiya_LensCapRear_90mm_f3_5.stl lens cap for an 88mm diameter lens, with inscription -Mamiya_LensCapRear_127mm_f3_5.stl lens cap for an 88mm diameter lens, with inscription -Mamiya_LensCapRear_180mm_f4_5.stl lens cap for an 88mm diameter lens, with inscription Printing: -Material I recommend a flexible filament, but PLA also works (to compensate for shrinking a scale factor of 100.2% to 100.25% is recommended for PLA). -Infill Infill of 30% was used successfully The letters sometimes losen while printing. Good adhesion is necessary for a clean base. Everything else should be set to a standard profile. If you have any suggestions, please text me or leave a comment.