Custom Top Plate For Louqe Ghost S1

prusaprinters

This Custom Top Plate is for the Louqe Ghost S1. It helps to reduce unnecessary noise from fan turbulence. Keep in mind to have a clean cable management (risercable and GPU powercable), otherwise the cables might reach into the fanblades. The main print consists of three files: customtopplate_back.stl customtopplate_front.stl bolt.stl (you need to print four of these) The bolts are used to join the two top plate pieces along the edges (this is a press fit, you might want to use pliers/tweezers). Additionaly, you can use some superglue to glue the overlapping parts together (see picture #4). The bracket is not necessary, however it can facilitate the gluing. IMPORTANT The custom top plate needs the fans/radiator to be mounted with srews. This gives the whole assembly the needed rigidity. Inspired by PippoAe's Ghost S1 Radiator Bracket: https://www.thingiverse.com/thing:4594718 Print instructionsI used a 0.15mm layer height (0.2mm might work as well [not tested, tolerance could be a problem]) and five perimeters with PETG. A more rigid filament, if available, is strongly recommend (e.g.: ASA, filament with carbon fibers, etc.), as there is a bit of bending with PETG. The biggest part is roughly 18cm (w) x 14cm (l) in size.