Custom Siphon

prusaprinters

<p>Because I was introducing it when competing with my <strong>soap dish,</strong> I kinda have to share this model with you.&nbsp;</p><p>Now you can donload both! Soap dish and a matching siphon!</p><p>&nbsp;</p><p>During corona the hardware stores were closed to the public and my siphon was broken. I couldn't find a siphon in the neighborhood or anywhere else so I printed one myself.</p><p>It turned out great, even though I had a X shift while printing.</p><p>It is completely watertight for over 1,5 years now. I also don't plan on replacing it with a metal one any time soon.</p><p>&nbsp;</p><p>It is one of my older projects, when I was still a beginner at CADding for 3D-printing, so I also didn't really care about avoiding supports. This model is therefore not realy optimized for anything - as much as I can remember.</p><p>&nbsp;</p><p>I also just put all the model files from my root folder in this upload. I cannot remember the differences between the two clamps.. maybe it is just split for printing.</p><p>&nbsp;</p><p>The g-code was generated just NOW. There should also be plenty of room for improvement. but it sure will work. The shell thickness (perimeters) is to ensure watertightness. But I think it might be lowered down to almost 2 perimeters.</p>