Cupholder furniture insert

prusaprinters

<p>I was commissioned to print six cup holders to go into a table-top gaming table. &nbsp; &nbsp;The dimensions are 89mm wide at the base 54mm from base to bottom of lip and 12mm from inside to the edge of lip. &nbsp; I added a bevel to the lip. &nbsp; Prints without supports because I split the model in two and print the top upside down. &nbsp; To achieve this there is a overlapping section to the side wall that you can glue with CV glue. &nbsp;&nbsp;</p><p>These were made custom for a specific purpose but You should be able to resize this as long as you do so proportionally or changes to the z axis should be pretty easy to manage. &nbsp;&nbsp;</p><p>This was made for a table but I know of some recliners and RV furniture for example often have cup holders in the arm rests. &nbsp; This could serve as a replacement if needed. &nbsp;&nbsp;</p><p>I printed .4 nozzle, .3 layer height draft prusa Mk3+ standard settings, 15% infill no issues. &nbsp;&nbsp;</p><p>I only have pictures of the tops. &nbsp;&nbsp;</p>