Cubistand Pencil Pen Brush Holder Stand

thingiverse

Simple Modern Paint Brush Stand. Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 1 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Notes: Printed with PLA I used Simplify 3D for slicing, and I opted for 20% infill throughout the project. However, keep in mind that printing speed and printer type can significantly impact print time - up to 3 hours for the base and main grid. Proper slicing techniques may help reduce this time. Notes: I printed the cubistand_rod_c.stl vertically on an unheated bed with blue painters tape and a light application of glue stick, resulting in no issues. Post-Printing Steps to assemble parts: I applied RC Model glue to attach the rod to the base, allowing it to dry for several minutes before gluing the main grid to the rod. The stand was then placed on its side to let dry completely, and finally, the top cap was secured. It's worth noting that you can print four rods to create a corner-to-corner design, but I preferred the modern, floating aesthetic.